.
.
Technical Specifications
1” to 6” sizes available
Up to 105°C temperature rated
Up to 3,000 psi pressure rated (3,500 if downhole)
High H2S & CO2 capability
High Temperature, Aromatics & Condensate
Cost-Effective
When compared to steel pipe, utilizing SRTP® reduces your capital cost by up to 80%.
Lower Maintenance
Slash maintenance costs by 60% with corrosion-resistant SRTP® Pipe that does not need chemical injections, pigging, sacrificial anode monitoring or paraffin treatments.
Rapid Installation
Install 2,500 ft of 4″ in just 15 minutes!
.
Surface Applications
SRTP® Pipe
Flowlines
• SRTP® delivers with spoolable pipe and tubing
• Reduce installed costs
• Corrosion-Resistant
• Allows for Rapid Installation
• SRTP® does not require venting of the annulus
• 99.6% Lower Methane Permeation than HDPE
• Minimal Release to the Environment
RTP-Rehab®
• Specialty RTP’s Turnkey RTP-Rehab® process rehabilitates pipelines
• Reduced installed costs
• Stops on going maintenance
• Provides a permanent solution
• No surface restoration
Injection Pipe
• Water/SWD
• WAG/EOR
• Water & CO₂ is combined all in one pipe.
.
Downhole Applications
SRTP-LIFT®
Velocity Strings
• Corrosion-Resistant
• Achieve critical velocity without excessive pressure drop
• Lower wall friction vs. steel
• More sizes vs. steel to optimize production
• Rigless Intervention
ESP Strings
• Wells to 3000 ft
• Corrosion-Resistant
• No armoring of cable required
• Lower pressure drop vs. steel
• Higher velocity to move solids
Injection Strings
• Corrosion-Resistant
• Less pressure drop vs. steel
• Less surface pressure requirements
• Smaller tubing = Less cost
• Superior erosion resistance vs. steel
• Water/CO₂/Methane/Chemicals
• No corrosion WAG system
• No drying of gases
RTP-Rehab®
• Recomplete the well without pulling out the steel tubing
• Lowers the risk of fishing
• Rigless intervention
• Lightweight
• Corrosion-Resistant SRTP®